Quikrete Concrete Mix (80 lb)
Ready mix concrete which includes cement, sand and pea gravel. Requires water and mixing. Usually used where a concrete truck can not access or for small repairs.
Quikrete Sand Mix (80 lb)
Includes cement and sand. Sometimes referred to as a topping mix. Allows for patching on concrete
where pea gravel would be too large, or for stone work.
Quikrete Mason Mix (80 lb)
Includes cement, lime and sand. This is a mason's grade mortar with fine sand for a smooth finish to your concrete block joints.
Essroc Portland Type 1 (94 lb)
Includes cement. This is a base used in mixing various masonry projects. Type 3 Portland is available also.
Essroc Portland Federal White (94 lb)
White cement to be used in various jobs.
Essroc 'S' Mortar
Includes cement and lime. Mason sand is added to this at a 3 to 1 mix ratio for laying concrete block.
Quikrete Vinyl Concrete Patch (40 lb)
Includes cement, sand and various bonding agents. This is used for patching steps, concrete walks, walls and many other small jobs. It is premixed, only requiring water. This product will cover approximately 18 sq.ft. at 1/4" thickness.
|
Quikrete Fast Setting Concrete (50 lb)
Includes cement, pea gravel, sand and additives for fast set. This mix will set between 20-40 minutes depending on the weather conditions, and temperature of the water. Used mostly for setting posts, mailboxes and piers.
Quikrete Quick Setting Cement (50 lb)
This is a cement based formula that is specially formulated for making structural repairs to vertical and overhead surfaces. Initial set will occur in approximately 10 minutes. Allows user to actually sculpt the material as it begins to harden.
Quikrete White Mason Mix (50 lb)
Includes white cement, white sand and lime. Premixed for convenience, just add water. Used where a white mortar joint is preferred. This item is a special order item, but can usually be in stock within days.
Quikrete Unsanded Gray Quikwall (50 lb)
Includes cement, fibers, sand and waterproofing agents. This product is a waterproofing cement that also helps with strucutrak support of the wall. It will cover 50 sq.ft. at 1/8" thickness.
Quikrete Heavy Duty Masonry Paint
Includes cement, sand and waterproofing agents. This cement based paint leaves a
sanded finish to the masonry surface which also waterproofs the surface. Just add water and brush. It is available in both gray and white and covers approximately 180 sq.ft. at 1/32" thickness.
|
Quikrete Glass Block Mortar (50 lb)
Includes a uniformly blended mixture of white sand, cement, lime and chemical additives designed to provide a decorative waterproof joint. This is generally used with glass block. Mixed to a stiff plastic like consistency, this product works well with glass block. This bag will cover approximately 20, 8" X 8" glass block.
Quikrete Commercial Grade Fine Sand (100 lb)
This is a silica sand commonly used for sand blasting. Be sure not to use this product for sand boxes. We have Play Sand available through our Fulton office for those needs.
Black Beauty Blasting Sand (100 lb)
This is a man-made product with very sharp edges for cutting away at debris while sandblasting. It comes in a fine and medium grade. Due to the size of the medium, typical sandblasters do not have the power nor the correct tip to allow this grade. Please ask to see a sample of these in our store.
Sonogrout (50 lb)
Used for grouting under machinery and column baseplates. Approximately 860 cu.in. per bag.
Type 'S' Hydrated Lime (50 lb)
Used for many reasons. Most commonly used for mixing stucco or a special mix of mortar.
Vermiculite (4 cu.ft.)
Used for masonry insulation. Added to 8" regular blocks brings the R value to 4.7.
|